G23 Adjustable Detection Distance Photoelectric Sensor Switch

Description

Throuht-beam type

Through-beam bype photoelectric switch is designed that via the light beam between opposite-mounted transmitter and receiver, the object passing through these two devices will interrupt the light beam and start the receiver. (Fig.R1)

Diffuse type

Diffuse reflection type photoelectric switch integrates the transmitter and the reciver. Light reflected by the photoelectric switch is reflected back to the receiver by the detected object. (Fig.R2)

Retroreflective type

Retroreflective type photoelectric switch also integrates the transmitter and the receiver, Its difference from other models is that reflecotr is used to relfect light to the photoelectric switch. Though the object between the photoelectric switch and reflector can reflect the light, it is much less efficient than the reflector so as to cut down reflected light. (Fig.R3)

Convergence reflection type (condensation type)

The working principle of convergence reflection type photoswitch is similar to that of direct reflection type one, while its projector and light receiver focus on boject distance, only when the object presents to the focus can the photoswitch actuate.(Fig.R4)

Outward appearance code

Model				G23
Dimension
Sense distance				10cm~50cm
Diffuse type	DC10~30VDC	NPN	NO	G23-3A10NA
			NC	G23-3A10NB
			NO+NC	G23-3A10NC
		PNP	NO	G23-3A10PA
			NC	G23-3A10PB
			NO+NC	G23-3A10PC
	AC90~250VAC		NO
			NC
	Relay
Sense distance				2m
Reflection-type	DC10~30VDC	NPN	NO	G23-3B2NA
			NC	G23-3B2NB
			NO+NC	G23-3B2NC
		PNP	NO	G23-3B2PA
			NC	G23-3B2PB
			NO+NC	G23-3B2PC
	AC90~250VAC		NO
			NC
	Relay
Sense distance				5m
Through-beam type	DC10~30VDC	NPN	NO	G23-3C5NA
			NC	G23-3C5NB
			NO+NC	G23-3C5NC
		PNP	NO	G23-3C5PA
			NC	G23-3C5PB
			NO+NC	G23-3C5PC
	AC90~250VAC		NO
			NC
	Relay
Output voltage peak				DC:200mA、AC:300mA
Consumption current				DC<15mA、AC<10mA
Standard detected object				DC<2ms、AC<20ms
Repeatability				2°~10°
Response frequency				Transparent oropaque body
Ambient temperature				-25℃ - +55℃
Ambient brightness				Sunlight below 10000LX, incandescent lamp below 30000LX
Shell material				ABS plastic
Protection grade				IP54

Application illustration or photoelectric switch