G13 NPN PNP NO NC Photoelectric Switch RetroreflictIve Type

Description

Throuht-beam type

Through-beam bype photoelectric switch is designed that via the light beam between opposite-mounted transmitter and receiver, the object passing through these two devices will interrupt the light beam and start the receiver. (Fig.R1)

Diffuse type

Diffuse reflection type photoelectric switch integrates the transmitter and the reciver. Light reflected by the photoelectric switch is reflected back to the receiver by the detected object. (Fig.R2)

Retroreflective type

Retroreflective type photoelectric switch also integrates the transmitter and the receiver, Its difference from other models is that reflecotr is used to relfect light to the photoelectric switch. Though the object between the photoelectric switch and reflector can reflect the light, it is much less efficient than the reflector so as to cut down reflected light. (Fig.R3)

Convergence reflection type (condensation type)

The working principle of convergence reflection type photoswitch is similar to that of direct reflection type one, while its projector and light receiver focus on boject distance, only when the object presents to the focus can the photoswitch actuate.(Fig.R4)

Outward appearance code

Overall dimensions
DETECTION DISTANCE				10cm
Diffuse type	DC 10-30 VDC	NPN	NO	G13-3A10NA
			NC	G13-3A10NB
			NO+NC	G13-3A10NC
		PNP	NO	G13-3A07PA
	AC 90-250 VAC		NC	G13-3A07PB
			NO+NC	G13-3A07PC
		SCR Contro Hable Silicon	NO
			NC
		Relay output
DETECTION DISTANCE				1m
Retrotrfilctive	DC 10-30 VDC	NPN	NO	G13-3B1NA
			NC	G13-3B1NB
			NO+NC	G13-3B1NC
		PNP	NO	G13-3B1PA
	AC 90-250 VAC		NC	G13-3B1PB
			NO+NC	G13-3B1PC
		SCR Contro Hable Silicon	NO
			NC
		Relay output
DETECTION DISTANCE				3m
Trough beam	DC 10-30 VDC	NPN	NO	G13-3C3NA
			NC	G13-3C3NB
			NO+NC	G13-3C3NC
		PNP	NO	G13-3C3PA
	AC 90-250 VAC		NC	G13-3C3PB
			NO+NC	G13-3C3PC
		SCR Contro Hable Silicon	NO
			NC
		Relay output
DC/SCR   Control output				DC:200mA/ AC:400mA Relay:3A
DC/AC Consumption current				DC<15mA、AC<10mA
DC/AC Response time				DC<2ms、AC<20ms
Directional angle				3°~-10°
Detected object				Transparent or opaque body
WoJrking envlrOnment temDerature				-25℃~+55℃
Intensity ofillumination of working environment				Sunlight under 10000LX  Incandescent lamp under 3000LX
Shell materia				Metal
Protection grade				IP54

Application illustration or photoelectric switch